AUXILIARY EQUIPMENT

ef3 - MAS - Partners Logo

MAS SC 700 is usable for the removal of all thermoplastics and mixed plastics

SAFE AND EFFICIENT VACUUM CLEANING

With a working compartment measuring 23.6 x 27.6 x Ø 27.6” diameter, the SC 700 reliably removes thermoplastic contamination from extrusion tools, filter parts and more.

No cleaning agents required. All contaminants are baked off under vacuum without any combustion. This protects the components against local overheating and thus against annealing and mechanical damage.

A cleaning cycle takes between 2 to 4 hours depending on part size, at a working temperature of 752 – 842 °F under vacuum.

MAS AUXILIARY: ESTABLISHED AND RELIABLE

The SC 700 can be installed in any room with a water supply, water drain and an electrical power supply.

TECHNICAL HIGHLIGHTS

  • Usable for the removal of all thermoplastics and mixed plastics
  • Fast cleaning process
  • Simple and safe to operate
  • Maintenance-free operation
  • Gentle cleaning increases the lifespan of tools, filters, dies, etc.
  • Kind to the environment as no incineration takes place
  • Low energy consumption

SPECIFICATIONS

External dimensions 76.4 x 33.5 x 72.8”
Workspace dimensions with grating
attachment
23.6 x 23.6 x 16.7”
Max. work piece weight ~ 265 lbs
Vacuum pump 1,5 kW, 2900 rpm
Water consumption vacuum pump 0.8 – 1.3 gal./min
Water supply 3/8”
Water discharge 1“
Heating units total 9.5 kW
Working temperature Max. max 842 °F

CLOSED PROCESS WATER CIRCUIT

The MAS CC 290 Closed Circuit Water Process system is designed to reduce the water consumption of the watering vacuum pumps to a minimum.

CC 290 SPECIFICATIONS

 

SS Water Tank 76.6 gal.
Water Pump 0.6 kW
Water Filter 2 pcs. For alternate operation
Heat Exchanger SS Plate heat exchanger

THROUGHPUT SCALE

The DW 1500/2500 throughput scale provides inline measurement of the capacity of a re-pelletizing or similar process. It is designed for flowable material like regrind or pellets.

• Easy to control

• Simple and fast start-up

• Minimal wear and maintenance

DW 1500/2500 THROUGHPUT SCALE

DW 1500 DW 2500
Main Dimensions (L x W x H) 25.2 x 27.6 x 68.9” 25.2 x 27.6 x 78.7”
Max. Capacity 3,306.9 lbs 5,512.0 lbs
Weigh Bin Capacity 1.8 cu. ft. 3.0 cu. ft.
Connection Type 3.9” 3.9”

SILO THROUGHPUT SCALE

The TMS 2500 silo throughput scale provides a fully integrated solution for the measuring, storing, and bagging of flowable materials like pellets or regrind. This system relies on the DW 2500 scale in combination with a silo and bagging station. All components that are in direct material contact are manufactured from stainless steel. The integrated controls provide valuable process information like fill level, current throughput, total shift capacity, etc.

TMS 2500 SILO THROUGHPUT SCALE

Main Dimensions (L x W x H) 59 x 66.9 x 181.1”
Max. Throughput 5,511.6 lbs
Silo Volume 75.0 cu. ft.
Connection NW 160
EF3-M&J

AVAILABLE NOW

M&J Mobile Industrial Shredder for
Rentals and Demos

Call: 704-944-3232
MORE INFORMATION
close-link